Hotspot Demo Configuration

TL;DR

• internet on: enp1s0f0 (IP 195.154.82.158)
• domain (*.demo.plug.kiwix.org)
• demo private network: 192.168.1.0/24
• dedicated user: qdemo
• bridge iface: br0
• bridge IP: 192.168.1.1

Available images

EDUPI-FR (0)

• domain: edupi-fr.demo.plug.kiwix.org
• tunnel: tap0
• IP: 192.168.1.3
• SSH port: 5022

EDUPI-EN (1)

• domain: edupi-en.demo.plug.kiwix.org
• tunnel: tap1
• IP: 192.168.1.4
• SSH port: 5122

Add new image

• add new tap
• add tap to bridge and enable it
• Edit /root/host-setup.sh
• Edit /etc/hosts: add private IP and corresponding hosts
• Create /home/qdemo/plugdemo_XXX (change IP address)
• Create /etc/nginx/sites-{available,enabled}/XXX.demo.plug.kiwix.org
• Create /usr/local/bin/img_run_XXX (change last number with TAP number)
• edit this document and add new image details

Setup image

# start QEMU
img_run_XXX /path/to/image.img

# wait until boot. log-in (pi/raspberry)
> sudo systemctl start ssh && exit

# once SSH is enabled (adjust suffix and SSH port)
scp -P 5022 ~/plugdemo_edupi-fr pi@localhost:plugdemo
scp -P 5022 ~/guest-setup.sh pi@localhost:  # make sure the name in guest-setup.sh if OK before
ssh pi@localhost -p 5022 "sudo mv ~/plugdemo /usr/local/bin/plugdemo && sh ~/guest-setup.sh"