Hotspot Demo Configuration
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
TL;DR
- internet on:
enp1s0f0(IP195.154.82.158) - domain (
*.demo.plug.kiwix.org) - demo private network:
192.168.1.0/24 - dedicated user:
qdemo - bridge iface:
br0 - bridge IP:
192.168.1.1
Available images
TESTS (0)
- reserved
TESTS (1)
- reserved
EDUPI-FR (2)
- domain:
edupi-fr.demo.plug.kiwix.org - tunnel:
tap2 - IP:
192.168.1.2 - SSH port:
5222
WIKIFUNDI-FR (3)
- domain:
wikifundi-fr.demo.plug.kiwix.org - tunnel:
tap3 - IP:
192.168.1.3 - SSH port:
5322
Add new image
- add new tap
- add tap to bridge and enable it
- Edit
/root/host-setup.sh - Edit
/etc/hosts: add private IP and corresponding hosts - Create
/home/qdemo/plugdemo_XXX(change IP address) - Create
/etc/nginx/sites-{available,enabled}/XXX.demo.plug.kiwix.org - Create
/usr/local/bin/img_run_XXX(change last number with TAP number) - edit this document and add new image details
Setup image
# start QEMU (in a screen)
img_run_XXX /path/to/image.img
# wait until boot. log-in (pi/raspberry)
> sudo systemctl enable ssh && sudo systemctl start ssh && exit
# once SSH is enabled (adjust suffix and SSH port)
scp -P 5222 ~/plugdemo_edupi-fr pi@localhost:plugdemo
scp -P 5222 ~/guest-setup.sh pi@localhost: # make sure the name in guest-setup.sh if OK before
ssh pi@localhost -p 5022 "sudo mv ~/plugdemo /usr/local/bin/plugdemo && sh ~/guest-setup.sh"