Difference between revisions of "MegaCli64"
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
; Check RAID reconstruction status | ; Check RAID reconstruction status | ||
./MegaCli64 -ldrecon showprog -L0 -a0 | ./MegaCli64 -ldrecon showprog -L0 -a0 | ||
; Refresh the kernel infos about the RAID | |||
rmmod megaraid_sas ; modprobe megaraid_sas | |||
; Extend the partition | |||
remove the partion and create it new | |||
; resize the filesystem (you have maybe to run e2fsck before) | |||
resize2fs /dev/xxxx | |||
== Server RAID configuration == | == Server RAID configuration == | ||
Revision as of 07:46, 17 October 2010
- Display Info about the adapter
- ./MegaCli64 -AdpAllInfo -aALL
- Display Physical devices
- ./MegaCli64 -PDList -aALL
- Display Logical devices
- ./MegaCli64 -LDInfo -LALL -aALL
- Display detailed Adapter and Device information
- ./MegaCli64 -AdpAlILog -aALL
- Make state "Unconfigured Good"
- ./MegaCli64 -PDMakeGood -PhysDrv[8:3,8:4,8:5] -a0
- Add disk to the array
./MegaCli64 -LDRecon -Start -R5 -Add -PhysDrv[252:7] -L0 -a0
- Check RAID reconstruction status
./MegaCli64 -ldrecon showprog -L0 -a0
- Refresh the kernel infos about the RAID
rmmod megaraid_sas ; modprobe megaraid_sas
- Extend the partition
remove the partion and create it new
- resize the filesystem (you have maybe to run e2fsck before)
resize2fs /dev/xxxx
Server RAID configuration
Port Slot Id Address 0 3 8 online 1 1 11 online 2 2 9 online 3 0 10 hotspare 4 5 15 online 5 7 14 unconfigured 6 0000000000000000 7 0000000000000000